Free Dining Room Layout Planner: Test Your Tables, Benches & Rugs Before You Buy
Use our free dining room layout planner to see how a table, chairs, a buffet, and a rug will fit in your room based on their sizes.
Dining Room Planner Tool
How the Dining Room Planner Works
The dining room planner draws your room to scale and then measures the available open floor space around the furniture you choose based on standard clearance guidelines. You enter the room size, add a table, and it tells you whether there’s enough space behind the chairs for people to sit down and for someone else to easily get past.
Enter the room size first – Type in the width and depth in feet at the top, and the grid will redraw with one square for each foot. Measure between the walls, and if you’ve got a feature like a built-in cabinet that projects into the room, measure to the front of it, as that’s the edge the chairs will hit.
Add a table and the chairs come with it – There are buttons for a rectangular, round, square, and oval table, but nothing for chairs, as the planner puts the chairs in for you. It allows 24″ of table edge per person, which is the figure the National Kitchen and Bath Association uses in their planning guidelines. If you stretch a 72″ table out to 96″, you’ll see the number of seats move up from 6 to 8. When a table has chairs at both ends, the planner leaves 6″ free at each end so that two people aren’t sharing a table leg, and that’s why a 6-foot table comes out as 6 seats instead of 8.
The shaded strips indicate where it’s tight, and you’ll see a strip of color on the floor behind each row of chairs. If it’s green, then you have the recommended amount of clearance between the edge of the table and the wall/furniture behind it. If it’s red, consider resizing for a better fit. There’s a list above the plan that details each measurement issue, e.g., the table has 30″ behind the chairs on its left-hand side and needs 36″.
There are two settings to check. The recommended one is 44″ behind the chairs (which allows you to walk behind a person who is sitting). The minimum is 36″ and at that distance you can still get past; it will just be a tighter squeeze. Both figures are from the NKBA guidelines, and these are not building code, as no code addresses where you put a dining table. Many standard dining rooms will pass the minimum without passing the recommended and still work.
A table set up against the wall loses the chairs on that side. If you move the table within 6 inches of the wall, the planner assumes no one will be sitting on that side and so removes the chairs, reduces the seat count, and stops checking that side. The same applies to a bench, meaning if you put a bench up against the table, it will replace the chairs on that side, and that side of the space will no longer be checked.
Buffets, rugs, and islands all have their own checks. A buffet or china cabinet requires some open floor space in front of it so that the doors and drawers can be opened, and the planner looks for a minimum of 36″ or 42″ as recommended clearance. An area rug goes under the table and is flagged when it reaches less than 24″ beyond the edge of the table, or 30″ as recommended. If you have an island, then the stools go along the front of it, and the other three sides are checked as walkways.
Doors show how far they swing, with each hinged door being drawn with an arc to show the floor it covers when it opens; French doors are drawn with two arcs, and you’ll get a warning if any piece of furniture is in the arc. You can change the hinge side or have the door swing out of the room. Sliding doors, pocket doors, and cased openings have no arc as they don’t use any floor.
Your plan is saved as you go, so you can close the tab and come back to it later on the same device. There’s a share link that opens the same layout on another phone or computer. You can also download the plan as an image (with the dimensions on it), and there’s a print button if you want it saved on paper.
| Check | Minimum | Recommended | Source |
|---|---|---|---|
| Table edge to wall or furniture, behind a seated diner | 36 in (edge past) | 44 in (walk past) | NKBA Kitchen Planning Guideline 8 |
| Table edge per diner | 24 in | 24 in | NKBA Guideline 9 |
| Clear floor in front of a buffet or china cabinet | 36 in | 42 in | NKBA Guideline 7 walkway; 42 in is designer convention |
| Behind island stools | 36 in | 44 in | NKBA Guideline 8 |
| Other sides of an island | 36 in | 42 in | NKBA Guideline 7 walkway and Guideline 6 work aisle |
| Rug past the table edge | 24 in | 30 in | Rug industry convention |
Seat counts hold back 6 inches at each corner of the long sides when the ends are seated, so a 72-inch table reads as six and not eight. A round table gets its circumference divided by 24 inches.
These are planning guidelines, and not code. No code sets furniture clearances in a dining room, but local dimensional rules still apply to the doors. If someone at your table uses a wheelchair, NKBA’s access standard asks for 60 inches behind the chairs on the route they use, well past the 44 the planner checks. The planner also treats round and oval tables as their bounding box when it measures, which is exact on the four main sides and slightly generous at the diagonals. Note: this planner is for entertainment purposes only; make sure to double-check results with your own measurements to ensure things fit before making any furniture purchases.
Designer Tips for Planning a Dining Room
Find the largest table the room will fit before you go shopping – To get a general idea of what will fit, take 6 feet off the width of the room and 6 feet off the length, and the result is the largest tabletop that will still leave you 36 inches to move on each side. In an 11-by-13-foot room, that’s 5 by 7 feet, so an 84-inch table will fit. Most tables of that length are only 40 to 42 inches wide, so you’ll have a bit more floor space along the sides than the minimum.
Give the most space to the side people walk on the most. Very few rooms will have 44 inches on all four sides of the table, and you don’t need that much on all sides. Determine which side is used to bring the food in from the kitchen or to walk through to the next room and allocate the 44 inches to that side. Any side that faces a wall with no door can be 36″. The NKBA allows as little as 32″ where there is no traffic behind the chair, but the person sitting there won’t be able to easily get up and leave the table until the person on their side moves out of the way.
Measure your table to the furniture, not the wall behind it – For instance, a sideboard is generally 18 to 24 inches deep, and you very easily overlook that when you’re working out the size of the table you want. If your table is currently 42″ from a buffet that’s 18″ deep, swapping it for a 24″ deep one brings you down to a pathway that’s 36″, which barely meets the minimum.
Use armchairs only at the ends of the table – An armchair is wider and doesn’t slide as far under the table as a side chair, so it requires more room behind it. If every chair around the table has arms, you can end up needing up to 6 inches more clearance on each side. The usual solution is to have armchairs at the head and foot and place armless chairs along the sides.
Choose a round table for a square room – A 48″ round table will fit in a 10 by 10 foot room with 36″ of space around it, and a 60″ round table will need about 11 by 11 feet. A rectangular table in a square room will tend to leave you with more floor than you need on two sides, and the other two sides will be short of what you need.
Size the rug for the chairs – The rug you use has to be big enough that the chair’s back legs are still on top of it when someone pushes back to stand up. That means you need at least 24″ of rug extending past the edge of the table on each side. For a 72″ x 36″ table, you’d need an 8′ x 10′ rug. Another consideration is that the rug looks better with about 12″ of floor showing between the rug and the wall. So if your room is less than 10′ wide, an 8′ rug will be too big, and you may be better off with a bare floor in this case.
If you need more seating, consider a bench – Try a bench with one wall right up against it for an informal seating arrangement. Chairs need a full 36″ behind them, but a bench against the wall only takes up its own depth, which is roughly 15 to 18″. That allows you to move the table in by about a foot and a half. The downside is that the person in the middle of the bench can’t get out unless the people on either side of them get up. If you have kids, benches are generally a good option if you’re running short on space in the room.
Hang the light over the table – If the plan shows your table will be off-center, you’ll need an electrician to move the box so the light lines up with the table. The standard size for the fixture is 1/2 to 2/3rds of the width of the table, with the bottom of the light 30 to 36 inches above the table if your ceiling is 8 feet. However, add about 3 inches for every additional foot of ceiling height.
Check the layout with the table leaves in. If your table extends out, then resize it in the planner to its full length and see what turns red. A chair that nearly blocks a doorway on the few days of the year you have the leaves in may be an acceptable compromise. If the extended table touches nearby furniture, or leaves no way at all of walking around it, then the table is probably too big for the room.
Compare the chair height to the table height – If you’re buying the table and chairs separately, it’s worth checking that they work together. A dining table is normally 28 to 30 inches high, and a chair seat ranges from 17 to 19 inches. You should have 10 to 12 inches from the top of the seat to the top of the table for a comfortable seat.
To showcase highly specific designs, some images on this website use advanced AI-generation software to illustrate ideas and room inspiration. See our editorial policy to learn more.